Side Detection 4 Sensor Kit with 2 Tone Buzzer

Parksafe’s Ultra Sonic Side Detection System is fitted to the side of a vehicle increasing safety when turning or when manoeuvring at low speed. Particularly relevant for near side blind spot safety solutions where cyclists or pedestrians can otherwise go undetected.

Description

We offer a range of ultrasonic sensor systems including, Side Detection, Wireless, and Rear sensors. They all provide their own particular benefits from helping to reverse safely to nearside blind spot awareness; particularly relevant where cyclists and pedestrians can otherwise go unseen.

Our Side Detection System is fitted to the side of a vehicle increasing safety when turning or when manoeuvring at low speed. Particularly relevant for near side blind spot safety solutions where cyclists or pedestrians can otherwise go undetected.

Specifications:

  • Voltage: 10 – 32v DC
  • Number of Sensors: 4
  • Side Detection
  • Sensor Head Size: 28mm
  • Mounting: Direct Angled Head, Flat Collars, Angled Collars,
  • Underhung Brackets (x 4)
  • Buzzer Only
  • Waterproof Sensor: IP68
  • Waterproof ECU: IP69K
  • Detection Range: 0.00 to 1.5M

Additional Specifications: 

  • Detection Zones: 3
  • Minimum Sensor Height:40cm
  • Power Consumption – 2.4 Watts @ 12 VDC
  • Current consumption: 200mA
  • Buzzer Volume: 75-105dB
  • Distance Detection Accuracy: 1cm
  • Detection Angle: 120H/ 60V
  • Detection Time: 0.2 Seconds

Detection Zones:

  • Zone 1= 0.00 – 0.6m
  • Zone 2= 0.60 – 1.0m
  • Zone 3= 1.0 – 1.50m

 

  • Zone Tolerance: +10cm
  • Operating Temp: -20 to 80C
  • Buzzer Frequency – 2400 Hz =/- 200 Hz
  • 1.0m or 1.5m detection range selectable via dip switch
  • Ultra fast detection in 200ms
  • Self Diagnostic: The ECU will check all sensors are working correctly, if it beeps then there is a faulty sensor.
  • Environment Learning Mode: This prevents false alarms from the vehicle ancillary equipment intruding into the first 1m on the detection zone.
  • Speed and indicator module required (PSPK3.DVS).

 

Box Contents:

  • 1 x CPU
  • 4 x Sensor Heads
  • 1 x Push Switch
  • Sensor Cables (4 x 5m, 2 x 2.5m)
  • 1 x 2 Tone Buzzer
  • 4 x Flat Collars
  • 4 x 12º Collars
  • 4 x Underhung Bracket
  • 1 x Wiring Loom
  • 20 x Cable Ties
  • Sticky Pad
  • Manual

You will need to use our signal indicator switch with these: PSPK3.DVS – CLICK HERE

Approvals: CE, ROHS, E8 – 10R – 04 – 7658

 

Additional information

Number Of Sensors

4

Mounting Options

Angled Collars, Direct Angled Head, Flat Collars, Underhung Brackets

Detection Zone

3

ECU IP Rating

IP69K

Sensor IP Rating

IP68

Reviews

There are no reviews yet.

Be the first to review “Side Detection 4 Sensor Kit with 2 Tone Buzzer”

Your email address will not be published.

Side Detection 4 Sensor Kit with Buzzer

You may also like…